| Bill of Materials |
| QTY | Stock # | Description |
| 10 | 20-000 | 248mm (9 3/4") Straight Track |
| 4 | 20-010 | 186mm (7 5/16") Straight Track |
| 4 | 20-020 | 124mm (4 7/8") Straight Track |
| 3 | 20-030 | 64mm (2 1/2") Straight Track |
| 1 | 20-040 | 62mm (2 7/16") Straight Track |
| 1 | 20-041 | 62mm (2 7/16") Feeder Track |
| 1 | 20-046~048 | Bumper (Use any of three styles) |
| 1 ea | 20-091 | 29mm (1 1/8") Straight Track |
| 20-091 | 45.5mm (1 3/4") Straight Track |
| 13 | 20-100 | 249mm (9 3/4") Radius 45� Curve Track |
| 4 | 20-110 | 282mm (11") Radius 45� Curve Track |
| 1 | 20-130 | 348mm (13 3/4") Radius 30� Curve Track |
| 2 | 20-140 | 381mm (15") Radius 30� Curve Track |
| 3 | 20-150 | 718mm (28 1/4") Radius 15� Curve Track |
| 1 | 20-160 | 481mm (19") Radius 15� Curve Track |
| 2 | 20-202 | #6 Left Turnout |
| 1 | 20-203 | #6 Right Turnout |
| 1 | 20-450~454 | 186mm (7 5/16") Single Track Plate Girder Bridge |
| 1 | 24-843 | Terminal Adapter Cord
� Used to connect Feeder Track to power pack. |
| Optional Items |
| QTY | Stock # | Description |
| 3 | 24-840 | Turnout Control Switch |
| 1 | 24-842 | DC Converter (If 24-840 is used) |
| Leftover straights and curves may be used to extend spur track in lower right hand corner of the layout, bending the spur around the corner and up the side of the layout. |
| Another #20-203 Right Turnout could be substituted for the #20-150 curve section shown at the entrance of the passing siding, creating the opportunity for an additional spur track in the lower left corner of the layout. This is a highly recommended substitution! It would creatively utilize the "extra" #20-020 straights, #20-160 curves and bumper left over from the original plan design, while also adding more track to your layout. |
